- Description
- Reviews
- FAQs
The IPM-1SE-DC48 unit can send one E1/T1/J1 interface over Ethernet using TDMoIP technology. IPM-1SE-DC48 is available with neg. DC (36-72V) power supply input. There are also AC and DC24V power supply versions available. The IPM-1SE can extend TDM networks using the Internet as transport network. Thus, cost effective solutions are available for deploying highly expensive TDM networks into areas with Internet coverage.
Features of IPM-1SE-DC48 access unit
- Supports synchronous TDM services and Ethernet over IP network
- Offers Ethernet cascading ability to increase the number of TDM interfaces
- Supports point-to-point E1, T1 or J1 over IP network transport
- Supports clock recovery for the E1/T1/J1 interface
- CLI, Telnet and SNMP management supported, upgradable firmware
- DC 36-72V power available with 3 screw DC power connector
Technical specifications
- Ethernet connectors: one RJ45 10/100Base-TX uplink port and one RJ45 10/100Base-TX LAN port
- TDM connectors: E1 (both RJ45 120ohms and dual BNC 75ohms), T1 RJ45 100ohms,
- Framing: Unframed, D4, ESF, PCM30, PCM31
- Data rate: 1544Kbps / 2048Kbps
- LEDs: PWR/ TD/ RD/ RTS/ DCD/ T-CLK Loss/ Red Alarm/ Sync Loss/ Yellow Alarm/ Err/ Test
- Power: DC 3 screw block 36-72V connector
- Temperature: 0-50§C (Operating), 0 - 70§C (Storage)
- Humidity: 5%-90% non-condensing
- Dimensions: 195mm x 235mm x 45mm
- Weight: 1600g
- Compliance: ITU-T G.703, G.704, G.706, G.732, G.823
- MTBF: 57,000 hours
Product Sheet:
- Data Sheet
- Installation Manual
- Customers Reviews
-
(0)
(0)
(0)
(0)
(0)
* Delivery Time.
We need 1-2 days to process your order before shipping. There are two shipping methoed.
Fast Delivery: The delivery time for US, European countries the delivery will take 3-5 days.
Slow Delivery: The delivery time for US, European countries the delivery will take 7-15 days.
* Tracking information.
After we ship package, customer receive automatic email with tracking details.
* Lost Package Policy.
If a package did not arrive in 2 weeks after the shipping date, then this package is treated as Lost. In this case a new package will be shipped to the customer provided we are able to give the same items as those purchased by the customer. If we are not able to provide the same items to substitute the lost ones we will either propose to the customer similar items or refund their cost as it will be mutually agree with the customer. If one or more items neither the same nor similar are available to be shipped, the customer can request to cancel the order entirely, thus the total cost of the order including shipping and handling cost will be fully refunded.
