ADSL2 and ADSL2 Ethernet and USB bridge modem with separate ADSL splitter

ADSL2 and ADSL2 Ethernet and USB bridge modem with separate ADSL splitter

US$39.00

( Order Today, Ship before 05/02/2024 )
  • Description
  • Reviews
  • FAQs

Product description
The ATU-R160-1A is an ADSL2/ADSL2 bridge modem equipped with an RJ11 POTS interface and both RJ45 10/100 Mbps Ethernet networking port and an USB 1.1 serial port. The ATU-R160-1A is flexible, offering up to 24Mbps downstream and 1Mbps upstream of data traffic. Model has been deployed in more than 500,000 units, making it a very reliable ADSL2 CPE, compatible with a large number of ADSL/ADSL2/ADSL2 DSLAMs.
Included in the ATU-R160-1A package, besides the AC adapter for standalone operation is a full ADSL splitter for telephone line installation.
Features

  • Full rate operation with up to 24Mbps downstream data rate and up to 1Mbps upstream data rate enables high-speed Internet access
  • Web GUI configuration and management
  • Supports TFTP upgrade
  • Provides ALGs to support most major applications, such as MSN, Messenger, CUSeeMe, ICQ, IRC, LDAP, PPTP, FTP, Quake, SIP, H.323, NetBios Over TCP/IP
  • Enables end-to-end ATM support, which allows traffic management and QoS
  • Built-in DHCP server automatically assigns IP addresses to all workstations on your LAN
  • All management and monitoring can be done through Telnet session
  • UPnP support

Technical specifications

Interfaces: RJ45 copper IEEE 802.3 10Base-T, 802.3u 100Base-TX compliant, USB 1.1 and RJ-11 ADSL/ADSL2 port
Supported standards: IEEE802.3 10Base-T802,3u, 100Base-TX, RFC2516
(PPPoE), ANSI T1.413 issue 2
ITU-T G.992.1 (G.dmt)
ITU-T G.992.2 (G.lite)
G.994.1 (G.hs, Multimode)
ITU-T G.992.3 (ADSL2 G.dmt.bis)
ITU-T G.992.4 (ADSL2 G.lite.bis)
ITU-T G.992.5 (ADSL2 , Annex A, B, L, M)
Reach Extended ADSL (RE ADSL)
Management features: Web-based GUI Configuration / Management
CLI (Command Line Interface) via serial interface
or Telnet over Ethernet
Telnet Remote Management
Firmware upgrade via FTP / TFTP
SNMP Support
Built-in Diagnostic tool
TR-069, CPE WAN Management Protocol
Front LEDs: ADSL, DATA, LAN, USB, PWR
Power: External 90-260V AC switching adapter 12VDC@1A with NEMA1-15(2 blades only), US type main plug
Consumption: 13 Watt maximum
Temperature: 0 5°C (Operating); 0 7°C (Storage)
Humidity: 20 80% non condensing (Operating); 0 90% (Storage)
Dimensions(WxDxH): 88mm x 125mm x 27mm
MTBF: 25,000 hours

Product Sheet:

  • Data Sheet
  • Installation Manual
Customers Reviews
0 Reviews
 (0)
 (0)
 (0)
 (0)
 (0)
Write Review

WRITE A REVIEW

  • Use your name:

  • Email:

Score:

Image:

Content:

* Delivery Time.

We need 1-2 days to process your order before shipping. There are two shipping methoed.

Fast Delivery: The delivery time for US, European countries the delivery will take 3-5 days.
Slow Delivery: The delivery time for US, European countries the delivery will take 7-15 days.

* Tracking information.

After we ship package, customer receive automatic email with tracking details.

* Lost Package Policy.

If a package did not arrive in 2 weeks after the shipping date, then this package is treated as Lost. In this case a new package will be shipped to the customer provided we are able to give the same items as those purchased by the customer. If we are not able to provide the same items to substitute the lost ones we will either propose to the customer similar items or refund their cost as it will be mutually agree with the customer. If one or more items neither the same nor similar are available to be shipped, the customer can request to cancel the order entirely, thus the total cost of the order including shipping and handling cost will be fully refunded.
 

Copyright © 2024 Fiber-Online.com All Rights Reserved. Powered By Fiber-MART.COM
payment