Fitel S218A Optical Fiber Thermal Stripper

When you need a cordless, light-weight, quick-strip solution, the S218 optical fiber stripper efficiently solves your problems.

This hot-stripping tool removes the coating of single fiber and ribbon fibers and runs on a slot-in battery, providing cordless access around your workplace.

Key Features:

• Applicable for single and up to 12-fiber ribbon
• Runs continuously on a slot-in battery for up to 8 hours per charge
• AC, DC (fusion splicer), or battery power selection
• 10 to 30-second quick heat-up
• Auto power save and power off
• Ergonomically designed and weighs less than half a pound (with DC adapter)

Specifications:

• Applicable Fibers: Silica glass-based optical fibers
• Single Fibers: 0.25 to 0.4mm coating diameter, 0.125 clad diameter (optional single-fiber adapter S218X-03 is required)
• Ribbon Fibers: 2- to 12-fiber ribbons, 0.3 to 0.4mm thickness (optional fiber holder appropriate for ribbon fiber is required)
• Strip Length: Max. 35mm
• Heat-up Time: 10 to 30 seconds
• Power Source: 100 to 240VAC, 50/60Hz with AC adapter (S952); 12VDC with DC adapter (power supplied from splicer with S951 DC adapter and S218X-02 DC Cord A); 7.6VDC with slot-in battery (S941)

S218A Standard Package Includes:

• One main body (S218A-01)
• One DC adapter (S951)
• One DC cord A (S218X-02)
• One AC adapter (S952)
• One slot-in battery (S941)
• One battery charger (S953)

Note:

Optional fiber holders: (sold in pairs)

• S218X-03: Single fiber holder, 250μm to 400μm coating diameter
• S706A-002: 2 fiber ribbon holder, 0.3 to 0.4mm thickness
• S706A-004: 4 fiber ribbon holder, 0.3 to 0.4mm thickness
• S706A-008: 8 fiber ribbon holder, 0.3 to 0.4mm thickness
• S706A-012: 12 fiber ribbon holder, 0.3 to 0.4mm thickness
• S705S-025: High strength single fiber holder, 250μm to 400μm coating diameter

The S218A standard package comes without any fiber holders, please order the fiber holders listed above per your application together with the S218A package.